How To Remove A Car Lock

Your car gets security from the keys and door locks.

The door locks allow you to feel safe whenever you leave your car unattended.

You can only unlock your vehicle’s lock using the ignition key or remote fob.

These locks position at the inner door handle, which links to the door latch that’s holding your car door shut.

Like any frequently used parts of your car, the door locks may sometimes incur some significant issues.

The most common one that car owners experience is a broken car lock.

Although there are times when the issue comes from the key, the experts also inspect the door lock for any problem before concluding anything.

Such an issue might have various reasons, and in most cases, your only option is to replace the entire door lock.

You may want to know how to remove a car lock so that you can do the job on your own.

However, you will need a careful and thorough understanding of this matter to avoid errors during the process.

Also, you will have to gather all the necessary tools for a car lock removal.

It is important to make sure that you know what you’re doing and you are confident in every action you take to prevent any further damages and accidents.

If you’re uncertain about how to remove a car lock, here’s a helpful guide to help you get by.

Identify What Has Gone Wrong with Your Car Lock

Your door lock gets exposed to wind, rain, and various elements in your surroundings every day.

The water and dirt may find ways to enter the lock and cause corrosion.

Also, the constant use of your car lock causes its internal components to wear over time.

When your car lock fails, you won’t be able to open it using the keys.

This situation can leave you worrying about what you must do.

Although you can check the locks yourself and find out what’s wrong, the best way to identify the cause of the problem is to seek professional locksmith assistance.

The expert auto locksmiths know how to handle the job properly for your safety and convenience.

Removing Your Broken Car Lock

A broken car lock needs to be addressed immediately to avoid security problems.

What you must do is to remove the car lock and replace it with a new one.

But how can you do this?

You may follow these steps on how to remove a car lock.

Shut the Windows and Detach the Window Handle

Before you start removing your car lock, you have to ensure that the windows are completely shut.

If your vehicle comes with a manual window handle, make sure to remove it.

Unscrew the handle and detach it from the regulator shaft using a screwdriver.

This is the first step of removing a car lock which you should not skip.

Remove the Door Screws and Panel

The next step is to extract the screws located around the perimeter on the inner part of your car’s driver door panel.

Use a screwdriver to do this and locate the ones within the armrest.

Remove all the screws and the cover of the armrest.

You will also need to detach the speakers in the door.

Open the door panel using the screwdriver, remove the moisture shield behind it so that you can see the components inside your car door.

Disconnect the Electrical Connections and Remove the Existing Door Lock

Before removing your old door lock, make sure to disengage the electrical connections and lock switches.

Ensure that the window remains completely closed to have a clear view of the rod that goes from the door lock to the latch.

Then, disconnect your car door latch from the door lock rod using needle pose pliers.

Reposition the Rod Holder and Install the New Lock

Remove the C-spring clip to release the door lock using the pliers.

Take out your existing door lock through the front of your car door.

Then, place the rod holder at your door lock’s end and ensure it remains in the same position.

Install the new door lock through the front part of your car door and push the C-spring down over its top.

Secure the new door lock tightly and attach the door lock rod to the door latch.

Put the plastic retainer clip back to its place and replace the moisture shield.

Finally, place your car door panel back to its right position.

If you want to, you can also replace the armrest cover, screws, or speakers that you have removed earlier or just put them all back to their original place.

Conclusion

Removing a car lock can be a daunting job.

It involves a series of tasks that may take your precious time away.

You will also need skills and effort to be able to prevent mistakes when undertaking the process.

For a safer and much convenient way of dealing with car lock removal, call EZ Car Locksmith in Mississauga.

Our mobile locksmith can do all the tasks for you and remove your broken car lock quickly.

We can even repair or replace them for you, whichever service you need.

You can assure that our technicians are always ready and equipped for any car locksmith concerns in Mississauga.

Contact us to know more about our professional locksmith services.